FAQS

Small order 100% before shipment .Large order T/T 50% as deposit, and 50% before shipment. We’ll show you the photos of the products and packages before you pay the balance.

EXW, FOB, CFR, CIF, DDU.

Generally, it will take 5 to 25 days after receiving your advance payment.The specific delivery timedepends on the items and the quantity of your order.

Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Yes, we have tested before delivery.

1. Wekeep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and wesincerely do business and make friends with them, no matter where they come from.

Planned Maintenance is a service program that is an essential requirement to help keep the lift truck in top operating condition throughout its lifetime. Recommendations range from hours used to month to month. PM is an important part of keeping the forklift running and downtime to a minimum.

There are several factors determining how long a set of tires will last on a lift truck. These factors include the amount of use of the truck, driving habits of the operator, the environment, tire compound and load weights.
Worn tires can cause problems with the lift truck, such as making the transmission work harder, discomfort for the operator and poor under clearance.
Generally press on tires need to be replaced after the outside diameter is worn by 1 1/2″, Pneumatic tires, depending on size should be replaced after the outside diameter has worn 2 to 3″.

Upon completing initial training certification, operators are required to be retrained every 3 years with a mid-term practical evaluation to be done 18 months after either initial training or retraining.

Load centers’ represent the middle of a forklift truck load, from front to back. It is calculated by measuring the load to be carried, and dividing by two (providing the load is evenly distributed, and positioned to butt up to the forklift backrest). The load center can increase with heavier and/or bulkier loads.

Load centers’ represent the middle of a forklift truck load, from front to back. It is calculated by measuring the load to be carried, and dividing by two (providing the load is evenly distributed, and positioned to butt up to the forklift backrest). The load center can increase with heavier and/or bulkier loads.

An example would be if you hold your arms out, and hang a weight from your elbows, you will require far less effort to keep the weight off the ground than if you hung the load from your fingertips; because the load center is nearer your body.

The same is true for forklifts. As you push the load center out, the capacity required to lift the weight increases. It is for this reason that sometimes a heavier truck is required to lift a specific item, due to its dimensions rather than weight.

If you’re working in cold storage or freezer applications you must use an electric forklift. An LPG forklift emits gas fumes and heat that will actually raise the temperature in the area in which it is being operated. Electric forklifts are also used where it is necessary the vehicle be fume free in operation, giving off no harmful emissions. They are also quiet in use, and due to the weight and concentrated mass of the battery, they are generally more maneuverable than gas engine powered equivalents.

We do offer one year warranty which would cover the failure not caused by miss-usage like overloading or misplacing the item. And there is no warranty for wearing parts such as wheel and fuse.

Stand size production time is about 30~35 days, and some models have the stock.

Customized size production time is about 45 days.

Our main material handling equipment is classified into four types: lift tables, stacker, forklift, pallet truck, drum handling equipment, forklift attachment, trolley, moving skates, order picker, shop crane, hydraulic jack, and so on.

In daily life also often use some simple and light material handling equipment, such as all kinds of hand trolley. Man first carried materials by hand, on his back, and on his shoulders. Later he gradually used animal power, and created simple machines such as levers, winches, pulleys, and carts. Now a lot of the equipment is very advanced.

The application of material handling machinery is of great significance in production, which is mainly because the amount of material handling is very huge, some iron and steel enterprises, each production of a ton of steel, need to handle raw materials, fuel, semi-finished products, finished products and waste, the total amount of more than 50 tons.

In addition, material handling costs are high, industrial countries for material handling costs often account for about 25% of the cost of products; Material handling occupies more labor, in the mechanization degree is not high in the enterprise, the handling workers often account for more than 15% of the total number of workers; When carrying heavy objects that cannot be carried by human hands or working in areas with high temperature or radioactive materials, mechanical handling must be carried out.

Therefore, in the production should be given enough attention to the material handling system, and try to use advanced applicable material handling machinery, in order to reduce labor intensity, reduce product damage, protect workers’ health, improve labor productivity and product quality, reduce production costs.