1.5 Ton Diesel Forklift Truck
Model Number:CPCD15
Rated Loading Capacity:1.5 Ton
Max. Lifting Height:3000mm
Lead Time:Quantity(Units) 1 – 100 >100 Est. Time(days) 30 To be negotiated
Customization:Customized logo(Min. Order: 1 Units)
Shipping:Support Sea freight
Features
Parameters
Appearance
The latest appearance design method was used to create the L series fluent and aesthetic outline, which matches the latest appearance trend.
Efficiency
Thanks to the long wheelbase design, the longitudinal stability of whole truck is much better, the hoisting capacity at same lift height are enhanced by an average of 100KG compared with former truck. At the same time, it prolongs work time of rear wheel as the reduced rear axle’s load.
The travel speed of truck has been raised, for example, the 2-2.5T type comes to 20km/h.
Increasing the hard proportion of hydraulic pipe, adopting right angle connector or straight through connector, that reduce the pressure loss of pipeline, and raise the lifting speed of mast, the speed is increased by an average of 10% compared with former truck.
Service
Dual air spring supporting hood and one-touch removal of the floorboard get you right to service operations, and reduces down-time.
The reasonable arrangement of fuse and installation of instrument, enable the replacing for fuse and maintenance for instrument easier.
Safe
A throttling device is set in pipe system，the mast won’t result in failing control of mast even some pipes broke.
By using a built-in hood lock device, the safe level of the truck has been raised.
| Generals | Manufacture | SINOLIFT | ||||
| Model | CPCD15-X1 | |||||
| CPCD15-W1 | ||||||
| Power type | Diesel | |||||
| Rated capacity | kg | 1500 | ||||
| Load center | mm | 500 | ||||
| Dimensions | Lift height | mm | 3000 | |||
| Free lift height E | mm | 164 | ||||
| Fork size N×U×L | mm | 920×100×40 | ||||
| Mast tilt angle α / β | deg | 6/12 | ||||
| Front o-verhang A2 | mm | 436 | ||||
| Overall dimensions | Length to face of fork A1 | mm | 2235 | |||
| Overall width B1 | mm | 1095 | ||||
| Mast lowered height H1 | mm | 1995 | ||||
| Mast extended height H3 | mm | 4030 | ||||
| Overhead guard height H2 | mm | 2075 | ||||
| Turning radius R | mm | 1960 | ||||
| Min. right angle aisle width X | mm | 1780 | ||||
| Performance | Travel speed (full load/no load) | Hydraulic | km/h | 14.5/13.5 | ||
| Mechanical | I | 6/5.5 | ||||
| II | 14/13.5 | |||||
| Lift speed with load | mm/sec | 510/450 | ||||
| Max. gradeability | % | 20 | ||||
| Self weight | kg | 2740 | ||||
| Wheel & Tires | Tires | Front | 6.50-10-10PR | |||
| Rear | 5.00-8-10PR | |||||
| Tread | Front B2 | mm | 890 | |||
| Rear B3 | mm | 920 | ||||
| Wheelbase A3 | MM | 1400 | ||||
| Ground clearance(no load/full load) | Mast M | mm | 95/105 | |||
| Frame F | 105/115 | |||||
| Drive units | Engine | Apply to truck model | CPCD15-X1 | CPCD15-W1 | ||
| Model | XINCHAI 4N23G31 | ISUZU C240NKFC-01 | ||||
| Rated output | kw/rpm | 30/2600 | 35.4/2500 | |||
| Rated torque | N.m/rpm | 131/1700-1900 | 137.7/1800 | |||
| No.of cylinder | 4 | 4 | ||||
| Bore×stroke | mm | 85*100 | 86*102 | |||
| Displacement | L | 2.27 | 2.369 | |||
English 
Español 
Русский 
Português 
Türkçe 
Tiếng Việt